Hot Dipped Galvanized Steel Sheet in Coil (GI) is produced by passing the Full Hard sheet which has undergone the acid washing process and rolling process through the zinc pot, thereby applying zinc film to the surface. It has excellent corrosion resistance, paintability, and workability due to Zinc's characteristics. Usually, hot-dipped galvanized steel sheet and galvanized steel coil process and specifications are basically the same.

Hot-dip galvanizing is the process of applying a protective zinc coating to a steel sheet or iron sheet, to prevent rusting.

Excellent anti-corrosion, paintability, and processability due to the self-sacrificing characteristic of zinc.

Available to select and produce the desired amount of zinc gilded and in particular enables thick zinc layers(maximum 120g/m2).

Classified as either zero spangle or extra smooth depending on whether the sheet undergoes skin pass treatment.

Type Of Galvanized Spangle

Galvanized with regular spangle, zinc-coated from 30g to 275g(g90). thickness from 0.15mm to 2.0mm. Regular spangle galvanized can be used in hot and wet outdoor places. For example fence, roofing, garage door, etc.

Galvanized with zero spangles, this kind of GI with brightly surface, zinc-coated from 30g to 2755g(g90). thickness from 0.12mm to 0.25mm. It could be used outdoor also. Currently mainly exported to Southeast Asia and Africa. It is cheaper than gi with regular spangle. This product can be processed later, for example, processed into stone coated tiles.